Cisco Firepower 4100 Command Reference

Firepower-module1> ~
telnet> quit
Connection closed.
firepower#
The following example shows how to connect to the module 1 using Telnet, and view available
commands:
firepower# connect module 1 telnet
Type exit or Ctrl-] followed by . to quit.
Firepower-module1>?
secure-login => Enable blade secure login
show => Display system information. Enter show ? for options
config => Configure the system. Enter config ? for options
terminalLength => Terminal settings. Enter terminal ? for options
ping => Ping a host to check reachability
nslookup => Look up an IP address or host name with the DNS servers
traceroute => Trace the route to a remote host
connect => Connect to specific csp console (asa, etc)
support => System file operations
testcrashinfo => Test crashinfo support
exit => Exit the session
help => Get help on command syntax
Firepower-module1> <Ctrl-], .>
firepower#
Related Commands
DescriptionCommand
Connects to the ASA CLI.connect asa
Connects to the FTD CLI.connect ftd
Connects to the vDP CLI.connect vdp
Cisco Firepower 4100/9300 FXOS Command Reference
49
A – R Commands
connect module

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English