Cisco Firepower 4100 Command Reference

When you create a new user account, you are automatically entered into local user mode (/security/local-user)
with an asterisk indicating the new account is not yet committed. You can specify additional user account
information such as password, first and last names, and so on, and then commit the new account information.
After you create the user account, the account name cannot be changed. You must delete the user account and
create a new one.
Example
This example shows how to enter security mode, enter a local user account (simultaneously creating
the new account since it does not exist), and then assigning first and last names to the account:
firepower # scope security
firepower /security # enter local-user test_user
firepower /security/local-user* # set firstname test
firepower /security/local-user* # set lastname user
firepower /security/local-user* # commit-buffer
firepower /security/local-user #
Related Commands
DescriptionCommand
Deletes an existing local user account.delete local-user
Specifies the date on which the user account expires.set expiration
Sets a password for the user account.set password
Cisco Firepower 4100/9300 FXOS Command Reference
66
A – R Commands
create local-user

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English