Cisco Mesh Access Points User Manual

2
If all LEDs are off, the access point has no power.
3
When the access point power supply is initially turned on, all LEDs are amber.
Serial Backhaul Access Point Guidelines for the Rest of the World (ROW)
In the 7.0 release, new 1524 SKUs are released, with both 802.11a radio units supporting the entire 5-GHz
band from 4.9 GHz to 5.8 GHz. This release also opens the 5-GHz band for the -A domain as well on the
existing hardware. The radios can also operate in UNII-2 (5.25 to 5.35 GHz), UNII-2 plus (5.47 to 5.725
GHz), and the upper ISM (5.725 to 5.850 GHz) bands.
The public safety band (4.94 to 4.99 GHz) is not supported for backhaul and for client access.
For information about the channels and maximum power levels of the AP1500 supported within the world's
regulatory domains, see the Channels and Maximum Power Settings for Cisco Aironet Lightweight Access
Points manual at:
• AP1520: http://www.cisco.com/en/US/docs/wireless/access_point/channels/lwapp/reference/guide/1520_
chp.html
• AP1550: http://www.cisco.com/en/US/docs/wireless/access_point/channels/lwapp/reference/guide/
1550pwr_chn.pdf
Table 5: Channels Supported Per Regulatory Domain, on page 21 provides a complete overview of channels
supported in each domain. In addition to 5 channels in the upper ISM band, there are 4 channels in the UNII-2
band and 11 channels in the UNII-2 Plus band. For outdoor APs, there are 5 channels in the upper ISM band,
3 channels in the UNII-2 band, and 8 channels in the UNII-2 Plus band.
Table 5: Channels Supported Per Regulatory Domain
Regulatory DomainsFrequency
(MHz)
Channel ID
-T-S-P-N-M-K-E-C-A
4940-5100 MHz
Yes4920184
Yes4949188
Yes496022/192
Yes498026/196
Yes50408
Yes506012
5250-5350 MHz
526052
DFSDFS528056
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
OL-27593-01 21
Mesh Network Components
Cisco Outdoor Mesh Access Points

Cisco Mesh Access Points Specifications

General

Brand	Cisco
Model	Mesh Access Points
Category	Wireless Access Point
Language	English