A
Cisco Small Business ATA Administration Guide 100
ATA Routing Field Reference
This chapter describes the settings that you can configure under the Router and
Network tabs in the administration web server pages.
NOTE This information applies to the SPA2102, SPA3102, SPA8000, and SPA8800
models. To configure router settings for the PAP2T, see the user guide for the router.
After you click the Router tab on the SPA2102, SPA3102, or the Network tab on
the SPA8000 and SPA8800, you can choose the following pages:
Router Status page, on page 100
WAN Status page, on page 102
LAN Status page, on page 106
Application page, on page 107
NOTE Not all fields listed may be applicable to your ATA device or your setup.
Router Status page
You can use the Router tab > Status page to view information about the Router.
The Status page includes the following sections:
Product Information section, on page 101
System Status section, on page 101
To Next Page
Loading...
Need help?
General
