Cisco SPA2102 - Static IP Settings Section; Pppoe Settings Section

ATA Routing Field Reference
WAN Status page
Cisco Small Business ATA Administration Guide 103
A
Static IP Settings section
PPPoE Settings section
Static IP Static IP address of ATA device, which takes effect if
DHCP is disabled.
The default is 0.0.0.0.
NetMask The NetMask used by ATA device when DHCP is
disabled.
The default is 255.255.255.0.
Gateway The default gateway used by ATA device when DHCP
is disabled.
The default is 0.0.0.0.
PPPoE Login Name The account name assigned by the ISP for connecting
on a Point-to-Point Protocol over Ethernet (PPPoE) link.
PPPoE Login
Password
The password assigned by the ISP for connecting on a
Point-to-Point Protocol over Ethernet (PPPoE) link.
PPPoE Service Name The service name assigned by the ISP for connecting
on a Point-to-Point Protocol over Ethernet (PPPoE) link.