Cisco SPA2102 User Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide 194
B
PSTN Line page (SPA3102)
On the SPA3102, you can use the Voice tab > PSTN Line page to configure your
PSTN line. This page includes the following sections:
 Line Enable section section on page 156
 NAT Settings section section on page 195
 Network Settings section section on page 195
 SIP Settings section section on page 196
 Proxy and Registration section section on page 199
 Subscriber Information section section on page 201
 Audio Configuration section section on page 202
 Dial Plans section section on page 205
 VoIP-To-PSTN Gateway Setup section section on page 206
 VoIP Users and Passwords (HTTP Authentication) section section on
page 208
 FXO (PSTN) Timer Values (sec) section section on page 209
 PSTN Disconnect Detection section section on page 211
 International Control (Settings) section section on page 214
Line Enable section
Line Enable To enable this line for service, select yes. Otherwise, select
no.
The default is yes.
PSTN Contact List Select the appropriate list: , , , or
. The default is .

Cisco SPA2102 Specifications

General

Brand	Cisco
Model	SPA2102
Category	Adapter
Language	English