Cisco SPA2102 User Manual

ATA Voice Field Reference
System page
Cisco Small Business ATA Administration Guide 119
B
System page
You can use the Voice tab > System page to configure your system and network
connections. With some variations, depending on the model, this page includes
the following sections:
 System Configuration section section on page 119
 Internet Connection Type section (PAP2T) section on page 120
 Optional Network Configuration section (PAP2T) section on page 120
 Miscellaneous Settings section (not used with PAP2T) section on
page 121
System Configuration section
Restricted Access
Domains
This feature is used when implementing software
customization.
Enable Web Server Enable/disable web server of the ATA device.
This feature should only be used on firmware version 1.0.9
or later.
The default is yes.
This field is only found in the PAP2T.
Web Server Port Port number of the ATA device administration web server.
The default is 80.
This field is only found in the PAP2T.
Enable Web Admin
Access
Lets you enable or disable local access to the
administration web server. Select yes or no from the drop-
down menu.
The default is yes.
Admin Password Password for the administrator. The default is no password.
User Password Password for the user. The default is no password.

Cisco SPA2102 Specifications

General

Brand	Cisco
Model	SPA2102
Category	Adapter
Language	English