ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide 177
B
FXS Port Polarity Configuration section
On the SPA8800, these settings are configured on the Phone pages only.
VoIP-to-PSTN Gateway Setup section (SPA8800)
Emergency
Number
Comma separated list of emergency number patterns. If
outbound call matches one of the pattern, SPA will disable
hook flash event handling. The condition is restored to
normal after the phone is on-hook. Blank signifies no
emergency number. Maximum number length is 63
characters.
The default is blank.
Idle Polarity Polarity before a call is connected: Forward or Reverse.
The default is Forward.
Caller Conn Polarity Polarity after an outbound call is connected: Forward or
Reverse.
The default is Forward.
Callee Conn
Polarity
Polarity after an inbound call is connected: Forward or
Reverse.
The default is Forward.
Line 1 VoIP Caller
DP
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA8800
unit during normal operation (in other words, not due to
fallback to PSTN service when Line 1 VoIP service is
down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}
Authentication is skipped for Line 1 VoIP caller.
The default is 1.
To Next Page
Loading...
