Cisco SPA2102 - Distinctive Ring;Cwt Pattern Names Section

ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide 139
B
Distinctive Ring/CWT Pattern Names section
CWT6 Cadence Cadence script for distinctive CWT 6.
The default is 30(.3/.1,.3/.1,.1/9.1).
CWT7 Cadence Cadence script for distinctive CWT 7.
The default is 30(.1/.1, .3/.1, .1/9.3).
CWT8 Cadence Cadence script for distinctive CWT 8.
The default is 2.3(.3/2).
CWT9 Cadence Cadence script for distinctive CWT 9. This field is for the
SPA2102 only.
The default is 30(.3/9.7).
Ring1 Name Name in an INVITEs Alert-Info Header to pick distinctive
ring/CWT 1 for the inbound call.
The default is Bellcore-r1.
Ring2 Name Name in an INVITEs Alert-Info Header to pick distinctive
ring/CWT 2 for the inbound call.
The default is Bellcore-r2.
Ring3 Name Name in an INVITEs Alert-Info Header to pick distinctive
ring/CWT 3 for the inbound call.
The default is Bellcore-r3.
Ring4 Name Name in an INVITEs Alert-Info Header to pick distinctive
ring/CWT 4 for the inbound call.
The default is Bellcore-r4.
Ring5 Name Name in an INVITEs Alert-Info Header to pick distinctive
ring/CWT 5 for the inbound call.
The default is Bellcore-r5.
Ring6 Name Name in an INVITEs Alert-Info Header to pick distinctive
ring/CWT 6 for the inbound call.
The default is Bellcore-r6.