ATA Voice Field Reference
Trunk Group page (SPA8000)
Cisco Small Business ATA Administration Guide 189
B
Subscriber Information section
Display Name
Display name for caller ID.
User ID
Extension number for this line.
Password
Password for this line.
Use Auth ID
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
The default is no.
Auth ID
Authentication ID for SIP authentication.
Call Capacity
Maximum number of calls allowed on this trunk group.
Choices: 1-15 or unlimited (16 calls). Default is unlimited.
Both incoming call and outgoing call are counted towards
this limit. The call capacity has the following impact on call
handling:
Inbound calls: When the limit is reached, the Trunk SUA
replies 486 to the caller.
Outbound calls: When the limit is reached, the Line SUA plays
a fast busy tone to the caller. Note that a trunk line can make
an outgoing call only through its own trunk. If that trunk
reaches full capacity, it will not attempt to failover to use other
trunks
To Next Page
Loading...
Need help?
General
