ATA Routing Field Reference
WAN Status page
Cisco Small Business ATA Administration Guide 102
A
WAN Status page
You can use the WAN Status page to enter the WAN connection settings. This
page includes the following sections:
Internet Connection Settings section, on page 102
Static IP Settings section, on page 103
PPPoE Settings section, on page 103
Optional Settings section, on page 104
MAC Clone Settings section, on page 105
Remote Management section, on page 105
QOS Settings section, on page 105
VLAN Settings section, on page 106
Internet Connection Settings section
Broadcast Pkts Sent Total number of broadcast packets sent.
Broadcast Bytes Sent Total number of broadcast packets received.
Broadcast Pkts Recv Total number of broadcast bytes sent.
Broadcast Bytes Recv Total number of broadcast bytes received and
processed.
Broadcast Pkts
Dropped
Total number of broadcast packets received but not
processed.
Broadcast Bytes
Dropped
Total number of broadcast bytes received but not
processed.
Current Time Current date and time of the system; for example, 10/3/
2003 16:43:00.
Connection Type The type of WAN connection. Options are: DHCP, Static
IP, PPPoE, PPPoE / DHCP (tries PPPoE then DHCP), or
DHCP/ PPPoE (tries DHCP then PPPoE).
To Next Page
Loading...
