ATA Routing Field Reference
Application page
Cisco Small Business ATA Administration Guide 107
A
LAN Networking Settings section
Use these network settings when using NAT.
Static DHCP Lease Settings section
Use these settings when using a static IP address.
Application page
You can use the Application page to view the port forward settings and to update
the DMZ settings, multicast passthru setting, and system reserved ports range.
This page includes the following sections:
Port Forwarding Settings section, on page 108
DMZ Settings section, on page 108
Miscellaneous Settings section, on page 109
LAN IP Address IP address of the ATA device on the LAN side.
LAN Subnet Mask IP address for subnet mask.
Enable DHCP Server The status of the DHCP server where Yes is enabled
and No is disabled.
DHCP Lease Time Provided by the DHCP Server. IP renewal process
begins when the time expires.
DHCP Client Starting IP
Address
Initial IP address the DHCP Server provides for PCs
attached to the LAN port.
Number of Client IP
Addresses
Number IP addresses available for the DHCP Server to
provide.
Enable Options are Yes or No. Default is No.
Host Mac Address The devices MAC address
Host IP Address The devices IP address
To Next Page
Loading...
Need help?
General
