Cisco SPA2102 - PSTN User Page (SPA3102); PSTN-To-Voip Selective Call Forward Settings Section

ATA Voice Field Reference
PSTN User page (SPA3102)
Cisco Small Business ATA Administration Guide 222
B
PSTN User page (SPA3102)
On the SPA3102, you can use the Voice tab > PSTN User page to configure the
PSTN user settings. This page includes the following sections:
 PSTN-To-VoIP Selective Call Forward Settings section section on
page 222
 PSTN-To-VoIP Speed Dial Settings section section on page 223
 PSTN Ring Thru Line 1 Distinctive Ring Settings section section on
page 223
 PSTN Ring Thru Line 1 Ring Settings section section on page 223
PSTN-To-VoIP Selective Call Forward Settings section
Ring On No New
VM
If enabled, the ATA device will play a ring splash when the
VM server sends SIP NOTIFY message to the ATA device
indicating that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
The default is no.
Cfwd Sel1-8 Caller Eight PSTN Caller Number Patterns to be blocked for VoIP
gateway services or forwarded to a certain VoIP number. If
the caller is blocked, the SPA will not auto-answers the call.
Cfwd Sel1-8 Dest Eight VoIP destinations to forward a PSTN caller matching
the
If this entry is blank, the
PSTN caller is blocked for VoIP service.