Cisco SPA2102 - PSTN-To-Voip Speed Dial Settings Section; PSTN Ring Thru Line 1 Distinctive Ring Settings Section; PSTN Ring Thru Line 1 Ring Settings Section

ATA Voice Field Reference
PSTN User page (SPA3102)
Cisco Small Business ATA Administration Guide 223
B
PSTN-To-VoIP Speed Dial Settings section
PSTN Ring Thru Line 1 Distinctive Ring Settings section
PSTN Ring Thru Line 1 Ring Settings section
Speed Dial 1-9 The VoIP number to call when the PSTN caller dials a single
digit 2
Ring1-8 Caller Eight PSTN Caller Number Patterns such that the
corresponding ring will be used to ring through Line 1 if the
PSTN caller matches this pattern.
Default Ring The default ring to be used to ring through Line 1. Choose
from {1,2,3,4,5,6,7,8,Follow Line 1}. If Follow Line 1 is
selected, the ring to be used is determined by Line 1s
distinctive ring settings.
The default is 1.