ATA Voice Field Reference
User page
Cisco Small Business ATA Administration Guide 216
B
User page
Depending on the model of ATA device, there may be one or more User pages.
You can use this page to configure the user settings.
On the SPA8000, these settings can be configured on the Line pages (Line 1, Line
2, and so on). On the SPA8800, theses settings can be configured on the Phone
pages (Phone 1, Phone 2, and so on).
This page includes the following sections:
Call Forward Settings section section on page 217
Selective Call Forward Settings section section on page 218
Speed Dial Settings section section on page 218
Supplementary Service Settings section section on page 219
Distinctive Ring Settings section section on page 220
Ring Settings section section on page 221
NOTE When a call is made from Line 1 or Line 2, the ATA device shall use the user and line
settings for that line; there is no user login support. Per user parameter tags must
be appended with [1] or [2] (corresponding to line 1 or 2) in the configuration profile.
It is omitted below for readability.
To Next Page
Loading...
