Cisco SPA2102 User Manual

ATA Voice Field Reference
System page
Cisco Small Business ATA Administration Guide 120
B
Internet Connection Type section (PAP2T)
Optional Network Configuration section (PAP2T)
DHCP Enable or disable DHCP.
The default is yes.
Static IP Static IP address of ATA device, which takes effect if DHCP
is disabled.
The default is 0.0.0.0.
NetMask The NetMask used by ATA device when DHCP is disabled.
The default is 255.255.255.0.
Gateway The default gateway used by ATA device when DHCP is
disabled.
The default is 0.0.0.0.
Host Name The host name of the ATA device.
Domain The network domain of the ATA device.
Primary DNS DNS server used by ATA device in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP is
disabled, this is the primary DNS server.
The default is 0.0.0.0.
Secondary DNS Sets the secondary DNS server to take over if problems
are discovered with the Primary DNS server. This is in
addition to DHCP-supplied DNS servers if DHCP is
enabled; when DHCP is disabled, this is the secondary
DNS server.
The default is 0.0.0.0.

Cisco SPA2102 Specifications

General

Brand	Cisco
Model	SPA2102
Category	Adapter
Language	English