Cisco SPA2102 User Manual

Basic Administration and Configuration
Upgrading, Rebooting, and Resyncing Your ATA Device
Cisco Small Business ATA Administration Guide 39
2
If no is specified, TFTP is assumed. If no is specified, the
host that requests the URL is used as .
If no port specified, the default port of the protocol is used. (69 for TFTP or 80 for
HTTP)
The is typically the file name of the binary located in a
directory on the TFTP or HTTP server. If no is specified,
is assumed, as in the following example:
Resync URL
The Resync URL lets you force the ATA device to do a resync to a profile specified
in the URL, which can identify either a TFTP, HTTP, or HTTPS server. The syntax of
the Resync URL is as follows:
NOTE The SPA resyncs only when it is idle.
If no parameter follows the Profile Rule setting from the Provisioning
page is used.
If no is specified, TFTP is assumed. If no is specified, the
host that requests the URL is used as
.
If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443
for HTTPS).
The profile-path is the path to the new profile with which to resync, for example:
Reboot URL
The Reboot URL lets you reboot the ATA device. The Reboot URL is as follows:
NOTE The ATA device reboots only when it is idle.

Cisco SPA2102 Specifications

General

Brand	Cisco
Model	SPA2102
Category	Adapter
Language	English