Cisco SPA2102 User Manual

Introducing Cisco Small Business Analog Telephone Adapters
Comparison of ATA Devices
Cisco Small Business ATA Administration Guide 12
1
ATA Models
NOTE Additional ATA models, Cisco SPA112, SPA122, and SPA232D are covered in
separate Quick Start Guides and administration guides. For links to all ATA
documentation, see www.cisco.com/go/smallbizvoicegateways.
NOTE The information contained in this guide is not a warranty from Cisco. Customers
planning to use ATA devices in a VoIP service deployment are advised to test all
functionality they plan to support before putting the ATA device in service. By
implementing ATA devices with the SIP protocol, intelligent endpoints at the edges
of a network perform the bulk of the call processing. This allows the deployment of
a large network with thousands of subscribers without complicated, expensive
servers.
Product
Name
FXS
(Analog
Phone)
FXO
PSTN
RJ-45
Internet
(WAN)
RJ-45
Ethernet
(LAN)
Voice
Lines
Description
PAP2T 2  1  2 Voice adapter with two FXS ports.
SPA2102 2  1 1 2 Voice adapter with router.
SPA3102 1 1 1 1 1 Voice adapter with router and PSTN
connectivity.
SPA8000 8  1 Maintenance
only
8 Voice adapter with support for up to
eight FXS devices. Supports SIP
Trunking for inbound call routing to
trunk groups. Also has a single multi-
port RJ-21 50-pin connector for
optional patch-panel connectivity.
SPA8800 4 4 1 Maintenance
only
8 Voice adapter with support for up to
four FXS phones and up to four FXO
PSTN lines. Also has a single multi-
port RJ-21 50-pin connector for
optional patch-panel connectivity.

Cisco SPA2102 Specifications

General

Brand	Cisco
Model	SPA2102
Category	Adapter
Language	English