Cisco SPA2102 - Page 171

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide 171
B
G726-16 Enable
To enable the use of the G.726 codec at 16 kbps, select
yes. Otherwise, select no.
The default is yes.
Echo Supp Enable
To enable the use of the echo suppressor, select yes.
Otherwise, select no.
The default is yes.
G726-24 Enable
To enable the use of the G.726 codec at 24 kbps, select
yes. Otherwise, select no.
The default is yes.
FAX CED Detect
Enable
To enable detection of the fax Caller-Entered Digits (CED)
tone, select yes. Otherwise, select no.
The default is yes.
G726-32 Enable
To enable the use of the G.726 codec at 32 kbps, select
yes. Otherwise, select no.
The default is yes.
FAX CNG Detect
Enable
To enable detection of the fax Calling Tone (CNG), select
yes. Otherwise, select no.
The default is yes.
G726-40 Enable
To enable the use of the G.726 codec at 40 kbps, select
yes. Otherwise, select no.
The default is yes.
FAX Passthru
Codec
Select the codec for fax passthrough, G711u or G711a.
The default is G711u.
DTMF Process
INFO
To use the DTMF process info feature, select yes.
Otherwise, select no.
The default is yes.
FAX Codec
Symmetric
To force the ATA to use a symmetric codec during fax
passthrough, select yes. Otherwise, select no.
The default is yes.
DTMF Process AVT
To use the DTMF process AVT feature, select yes.
Otherwise, select no. This field is not available for the
PAP2T.
The default is yes.