ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide 198
B
SIP Debug Option SIP messages are received at or sent from the proxy listen
port. This feature controls which SIP messages to log.
Choices are as follows:
 noneNo logging.
 1-lineLogs the start-line only for all messages.
 1-line excl. OPTLogs the start-line only for all messages
except OPTIONS requests/responses.
 1-line excl. NTFYLogs the start-line only for all messages
except NOTIFY requests/responses.
 1-line excl. REGLogs the start-line only for all messages
except REGISTER requests/responses.
 1-line excl. OPT|NTFY|REGLogs the start-line only for all
messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
 fullLogs all SIP messages in full text.
 full excl. OPTLogs all SIP messages in full text except
OPTIONS requests/responses.
 full excl. NTFYLogs all SIP messages in full text except
NOTIFY requests/responses.
 full excl. REGLogs all SIP messages in full text except
REGISTER requests/responses.
 full excl. OPT|NTFY|REGLogs all SIP messages in full text
except for OPTIONS, NOTIFY, and REGISTER requests/
responses.
The default is none.
RTP Log Intvl The interval for the RTP log.
Restrict Source IP If Lines 1 and 2 use the same SIP Port value and the
Restrict Source IP feature is enabled, the proxy IP address
for Lines 1 and 2 is treated as an acceptable IP address for
both lines. To enable the Restrict Source IP feature, select
yes. Otherwise, select no. If configured, the PAP2T will
drop all packets sent to its SIP Ports originated from an
untrusted IP address. A source IP address is untrusted if it
does not match any of the IP addresses resolved from the
configured (or if
is yes).
The default is no.
To Next Page
Loading...
Need help?
General
