Cisco SPA2102 - Page 203

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide 203
B
G723 Enable To enable the use of the G723a codec at 6.3 kbps, select
yes. Otherwise, select no.
The default is yes.
Echo Canc Adapt
Enable
To enable the echo canceller to adapt, select yes.
Otherwise, select no.
The default is yes.
G726-16 Enable To enable the use of the G726 codec at 16 kbps, select
yes. Otherwise, select no.
The default is yes.
Echo Supp Enable To enable the use of the echo suppressor, select yes.
Otherwise, select no.
The default is yes.
G726-24 Enable To enable the use of the G726 codec at 24 kbps, select
yes. Otherwise, select no.
The default is yes.
FAX CED Detect
Enable
To enable detection of the fax Caller-Entered Digits (CED)
tone, select yes. Otherwise, select no.
The default is yes.
G726-32 Enable To enable the use of the G726 codec at 32 kbps, select
yes. Otherwise, select no.
The default is yes.
FAX CNG Detect
Enable
To enable detection of the fax Calling Tone (CNG), select
yes. Otherwise, select no.
The default is yes.
G726-40 Enable To enable the use of the G726 codec at 40 kbps, select
yes. Otherwise, select no.
The default is yes.
FAX Passthru
Codec
Select the codec for fax passthrough, G711u or G711a.
The default is G711u.
DTMF Process
INFO
This field is not available for the PAP2T. To use the DTMF
process info feature, select yes. Otherwise, select no.
The default is yes.