Cisco SPA2102 - Page 213

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide 213
B
Disconnect Tone This value is the tone script which describes to the SPA the
tone to detect as a disconnect tone. The syntax follows a
standard Tone Script with some restrictions. Default value
is standard US reorder (fast busy) tone, for 4 seconds.
Restrictions:
 2 frequency components must be given. If single frequency
is desired, the same frequency is used for both
 The tone level value is not used. 30 (dBm) should be used
for now.
 Only 1 segment set is allowed
 Total duration of the segment set is interpreted as the
minimum duration of the tone to trigger detection
 6 segments of on/off time (seconds) can be specified. A 10%
margin is used to validated cadence characteristics of the
tone.
The Disconnect Tone Script values for various countries
follow:
US480@-30,620@-30;4(.25/.25/1+2)
UK400@-30,400@-30; 2(3/0/1+2)
France440@-30,440@-30; 2(0.5/0.5/1+2)
Germany440@-30,440@-30; 2(0.5/0.5/1+2)
Netherlands425@-30,425@-30; 2(0.5/0.5/1+2)
Sweden425@-10; 10(0.25/0.25/1)
Norway425@-10; 10(0.5/0.5/1)
Italy425@-30,425@-30; 2(0.2/0.2/1+2)
Spain425@-10; 10(0.2/0.2/1,0.2/0.2/1,0.2/0.6/1)
Portugal425@-10; 10(0.5/0.5/1)
Poland425@-10; 10(0.5/0.5/1)
Denmark425@-10; 10(0.25/0.25/1)
400@-15; 10(0.25/0.25/1)
425@-13; 10(0.375/0.375/1)