SIP Trunking and Hunt Groups on the SPA8000
Cisco Small Business ATA Administration Guide 79
4
The Trunk Status page shows all calls that are currently active on each trunk
group.
This page shows a snapshot of the trunk activity. You can refresh the data at any
time by clicking the Refresh button on the web browser toolbar. The page shows
the following information:
External: The called number
Station: The SPA8000 line that is in use for this call
Direction: The direction of the call, either Outbound or Inbound
State: The state of the call
Calling: An outbound call was initiated but is not ringing at the other end.
Proceeding: The outbound call is ringing at the other end.
Ringing: An inbound call is ringing.
Connected: The call is connected.
Duration: The duration of the call
In the case of a hung call, you can select the check box for the call and then click
the Delete button to cancel the call.
To Next Page
Loading...
Need help?
General
