Configuring VPN
Configuring SSL VPN for Browser-Based Remote Access
Cisco SA500 Series Security Appliances Administration Guide 164
7
Adding a TCP Application Configuration for Port Forwarding
TCP Application Configuration is required for port forwarding.
STEP 1 Click VPN > SSL VPN Server > Port Forwarding.
The Port Forwarding window opens. This page includes two tables:
• List of Configured Applications for Port Forwarding
• List of Configured Host Names for Port Forwarding
STEP 2 To add an application, click Add in the List of Configured Applications for Port
Forwarding table.
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries, check the box in the first column of
the table heading.
STEP 3 Enter the following information:
• Local Server IP Address: Enter the IP address of the internal host machine
or local server.
• TCP Port Number: Enter the port number of the TCP application that
enables port forwarding.
STEP 4 Click Apply to save your settings.
HTTP (web) 80
POP3 (receive mail) 110
NTP (network time protocol) 123
Citrix 1494
Terminal S er vice s 3389
VNC (virtual network computing) 5900 or 5800
TCP Application Port Number
To Next Page
Loading...
Need help?
General
