Cisco WS-CE500 - Date and Time

Troubleshooting
Date and Time
Cisco SA500 Series Security Appliances Administration Guide 220
A
Date and Time
Symptom: Date shown is January 1, 2000.
Possible cause: The security appliance has not yet successfully reached a
network time server (NTS).
Recommended action:
STEP 1 If you have just configured the security appliance, wait at least 5 minutes, click
Administration > Time Zone.
STEP 2 Review the settings for the date and time.
STEP 3 Verify your Internet access settings.
Symptom: The time is off by one hour.
Possible cause: The security appliance does not automatically adjust for Daylight
Savings Time.
Recommended action:
STEP 1 Click Administration > Time Zone.
STEP 2 Check or uncheck Automatically adjust for Daylight Savings Time.
STEP 3 Click Apply to save your settings.