Cisco WS-CE500 - Quick VPN Status

Status
VPN Status
Cisco SA500 Series Security Appliances Administration Guide 212
10
Quick VPN Status
This page displays the status of QuickVPN connections and allows you to DROP
any existing active (ONLINE) connections.
Status > VPN Status > Quick VPN Status
Poll Interval Enter a value in seconds for the poll interval. To
modify the poll interval, click the Stop button and
then click Start to restart the automatic refresh
using the specified poll interval.
Start Click to enable the automatic page refresh feature.
Stop Click Stop to disable the automatic page refresh
feature.
User Name Name of the IPsec User associated with the
QuickVPN tunnel.
Remote IP Displays the IP address of the remote QuickVPN
client. This could be NAT/Public IP if the client is
behind the NAT router.
Status Displays the current status of the QuickVPN client.
OFFLINE means that the QuickVPN tunnel is NOT
initiated/established by the IPsec user. ONLINE
means that QuickVPN Tunnel, initiated/established
by the IPsec user, is active.
Action Click Drop to terminate an active/ONLINE
connection and hence to change the status of
QuickVPN client to OFFLINE.
Poll Interval Time in seconds, after which the page will
automatically reload.To modify the poll interval
click the Stop button and use Start to restart
automatic refresh.
Start Click to enable automatic page refresh feature.
Stop Click Stop to disable the automatic page refresh
feature.