Cisco WS-CE500 User Manual

Administration
Configuring RADIUS Server Records
Cisco SA500 Series Security Appliances Administration Guide 193
8
Configuring RADIUS Server Records
This page allows the user to configure details of any RADIUS servers that are used
for authentication.
STEP 1 Click Administration> RADIUS Server.
STEP 2 To add a server, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries, check the box in the first column of
the table heading.
After you click Add or Edit, the Radius Server Configuration window opens.
STEP 3 Enter the following information:
• Authentication Server IP Address: Enter the IP address of the
authenticating Radius Server.
• Authentication Port: Enter the port number on the Radius server that is used
to send the Radius traffic.
• Secret: Enter the shared key that is configured on the Radius server. The
Secret can contain all characters except for single quote, double quote and
space.
• Timeout: Enter the number of seconds that the connection can exist before
re-authentication is required.
• Retries: Enter the number of retries for the device to re-authenticate with the
Radius server.
STEP 4 Click Apply to save your settings.

Cisco WS-CE500 Specifications

General

Brand	Cisco
Model	WS-CE500
Category	Network Hardware
Language	English