Cisco WS-CE500 User Manual

9
Cisco SA500 Series Security Appliances Administration Guide 197
Network Management
This chapter describes how to configure the remote management features for the
router. It includes the following sections:
• RMON (Remote Management)
• CDP
• SNMP
• UPnP
• Bonjour
To access the Network Management pages, click Network Management from the
Configuration Utility menu bar.
RMON (Remote Management)
The primary means to configure this gateway via the browser-independent GUI.
The GUI can be accessed from LAN node by using the gateway’s LAN IP address
and HTTP, or from the WAN by using the gateway’s WAN IP address and HTTPS
(HTTP over SSL).
The Remote Management page allows you to access the router from a remote
WAN network. The security appliance allows remote management securely using
HTTPS, i.e. https://.
NOTE Disabling Remote Management prevents SSL VPN access.
IMPORTANT: When remote management is enabled, the router is accessible to
anyone who knows its IP address. Since a malicious WAN user can reconfigure the
router and misuse it in many ways, it is highly recommended that you change the
admin and guest passwords before continuing.

Cisco WS-CE500 Specifications

General

Brand	Cisco
Model	WS-CE500
Category	Network Hardware
Language	English