Cisco WS-CE500 - Device Status

Status
Device Status
Cisco SA500 Series Security Appliances Administration Guide 205
10
Device Status
Use this Dashboard page to view the current system information.
Status > Device Status
Router Information
System Name Unit name of the device.
Firmware (Primary &
Secondary)
Version of the firmware that the router is currently
using (primary), and the version that the router was
previously running (secondary). By default, the
router will boot with the primary router information
Serial Number Serial number of this device, unique per security
appliance.
Users (Admin/Guest) Number of administrative and guest users
configured on the system
Resource Utilization
CPU Utilization Total CPU usage by the system
Memory Utilization Total memory usage by the system.
System Up Time Duration for which the device has been running.
Licenses
Displays the license status of various licensed features in the system. These
features are ProtectLink Gateway, ProtectLink Endpoint, SSL VPN and Intrusion
Prevention System.
Syslog Summary
Displays the summary of the system event log. Syslog entries can be of
different severity levels. The number of logs in each level is displayed.
Routing Mode
Displays the routing mode of the router (NAT or Classical routing),
WAN Mode
Displays the WAN configuration mode of the router (Single WAN port, Auto-
rollover, or Load Balancing).