Administration
Configuring the Logging Options
Cisco SA500 Series Security Appliances Administration Guide 186
8
- Output Blocking Event Log: If checked, the device displays logs for
packets blocked by the ProtectLink service.
- Bandwidth Limit: If checked, displays logs related to packets dropped
due to Bandwidth Limiting.
STEP 3 Click Apply to save your settings.
Routing Logs
LAN to WAN Enable logging for firewall rules matching LAN to WAN
source and destination. Logging for individual firewall rules
should be enabled.
LAN to DMZ Enable logging for firewall rules matching LAN to DMZ
source and destination. Logging for individual firewall rules
should be enabled.
DMZ to WAN Enable logging for firewall rules matching DMZ to WAN
source and destination. Logging for individual firewall rules
should be enabled.
WAN to LAN Enable logging for firewall rules matching WAN to LAN
source and destination. Logging for individual firewall rules
should be enabled.
DMZ to LAN Enable logging for firewall rules matching DMZ to LAN
source and destination. Logging for individual firewall rules
should be enabled.
WAN to DMZ Enable logging for firewall rules matching WAN to DMZ
source and destination. Logging for individual firewall rules
should be enabled.
To Next Page
Loading...
