Factory Default Settings
Wireless Settings
Cisco SA500 Series Security Appliances Administration Guide 236
D
MAC Authentication Default
Action
Permit
Load Balancing Mode disabled
802.1d Spanning tree mode on
wired / WDS link
disabled
Country or Band code for Radio
such as FCC, ETSI etc.
Depends on SKU
Channel Bandwidth 40Mhz
Maximum associations
supported
200
Antenna Selection, automatically
selects best antenna
Auto
WMM APSD Power mode setting On
AP Detection for neighbor AP -
both rogue and known APs
enabled
For a multiple-radio AP, which
radio this WDS link is using
Radio 1
Arbitration Inter Frame Spacing
(AIFS)
4 queues = 1ms, 1ms, 3ms, 7ms
Minimum contention window 4 queues = 3ms, 7ms, 15ms, 15ms
Maximum Burst 4 queues - 1.5ms, 3ms, 0ms, 0ms
Maximum contention window 4 queues = 7ms, 15ms, 15ms, 15ms
Feature Setting
To Next Page
Loading...
