Clear-Com eclipse HX-Delta User Manual

User Guide | Eclipse HX-Delta
Page 110
Figure 8-10: T1 Trunking using an E1 Network
8.6 Trunking failover
Where the E1/T1 trunking has been configured with redundant trunks audio
will be switched from the primary trunk to the backup trunk when a failure is
detected.
When failover occurs from primary to backup there will be a three second
audio break on any route running over the trunk.
If the trunk routing is later switched back from the backup trunk to the
primary trunk there will be no loss of audio.

Clear-Com eclipse HX-Delta Specifications

General

Brand	Clear-Com
Model	eclipse HX-Delta
Category	Intercom System
Language	English