• Microsoft Windows Server 2012 R2 (64-bit)
Note: Operation on other platforms is no longer supported.
• When running EHX on Windows OS, you can run the client and server on
separate machines, connected over the network.
When running EHX on Windows operating systems, the client and server can run
on separate machines connected over a network. You can use EHX to perform a
wide range of configuration tasks, including:
• Assigning labels (names) to ports and user panels.
• Creating point-to-point and fixed group (partyline) communications
between connected audio devices.
• Enabling, limiting or disabling features of any connected user panel or
card.
• Configuring connections between matrices.
Note: The above list is not definitive. For more information about the capabilities of
EHX, see EHX Help.
The EHX system can be set up to run on a client/server model over a network,
allowing the system administrator to control multiple matrices remotely.
3.7 User panels
The following Clear-Com user panels are compatible with the Eclipse HX-Delta:
• V-Series panels, including expansion panels.
• i-Series panels, including expansion panels.
Note: For more information about installing, using and maintaining user panels, and
connecting user panels to the matrix, see either:
• The V-Series Panels User Guide.
• The i-Series Panels User Guide.
To Next Page
Loading...
Need help?
General
