4.2.1 Installing the external power supplies ........................................ 31
4.2.2 Installing the rear panels .......................................................... 32
4.3 Installing CPU cards ...................................................................... 32
4.3.1 Hot patching CPU cards ............................................................ 33
4.3.2 Checking the CPU Card installation ............................................ 34
4.4 Installing interface cards ................................................................ 35
4.4.1 Installing an interface card to the matrix .................................... 35
4.4.2 Removing an interface card from the matrix ............................... 35
4.4.3 Combining interface cards in the matrix ..................................... 35
4.4.4 Static sensitivity ...................................................................... 36
4.4.5 Hot patching (hot plugging) ...................................................... 37
4.4.6 Configuration .......................................................................... 37
4.4.7 Checking MVX-A16 analog port card installation .......................... 37
4.5 Wiring audio devices to the matrix .................................................. 38
4.6 Wiring panels to the matrix ............................................................ 39
4.6.1 4-Pair analog .......................................................................... 40
4.6.2 Single-pair digital .................................................................... 40
4.7 Wiring CPU card interfaces ............................................................. 41
4.7.1 CPU card interface connectors ................................................... 42
4.8 DSE1/T1 Matrix to Matrix crossover cable connections ....................... 52
4.9 E1/T1 Matrix to Matrix straight cable connections ............................. 52
4.10 E1 to FreeSpeak / CellCom / FreeSpeak II antenna straight cable
connection ........................................................................................... 52
5 Using the Eclipse HX-Delta .............................................................. 54
5.1 Creating and storing system configurations ...................................... 54
5.2 Setting the default IP Address ........................................................ 54
5.3 Using the CPU card Ethernet ports .................................................. 54
5.3.1 Configuration restrictions for Ethernet ports ................................ 55
5.4 CPU card fail-safes ........................................................................ 55
5.5 CPU card lights and controls ........................................................... 57
5.5.1 Using the embedded configuration ............................................. 61
5.6 MVX-A16 analog card front-panel lights and controls ......................... 63
5.7 Power status and alarm lights ......................................................... 65