ClearCom FreeSpeak II - Page 87

User Guide | FreeSpeak II™ Base station version
Page 87
Key to display layout
Feature
Description
A
Label for key A assignment.
B
Label for key B assignment.
C
Label for Key C Assignment or CALL key for Key A if not assigned.
D
Label for Key D Assignment or CALL key for Key B if not assigned.
E
Volume level for Key A assignment.
F
Volume level for Key B assignment.
G
Signal strength.
H
Role name for the role assigned to the Beltpack.
I
Battery life remaining (in hours for Li-Ion, in % for AA battery).
Table 9 Key to display layout
A 4-pin male headset connector is provided for connection with a standard Clear-
Com headset or similar device. The FS II beltpack will operate for approximately
18 hours using a rechargeable Li-Ion battery. Real operational times depend on
usage and quality of batteries used. You can also use AA batteries, but you must
not attempt to recharge them.
On the bottom of the beltpack, there is an LED torch with a latching key that
provides a quick and convenient source of illumination when working in poorly lit
areas.