InteliDrive DCU Industrial 3.4.0 Global Guide
11
Measuring (instruments) screens
Screen Content
Hidden, but available by Key combination, see Functions available from ID-DCU Industrial front panel
keys (page 17)
Info screen: Fw and App. version, s.n., .. Language list and switch.
Language screen
Fast edit screen
Available using ↑ or ↓ front panel keys
ECU diagnostics code list
Alarm list
1 = Main screen
ID Mode, RPM1, Engine state, Oil Pressure and Coolant
temperature (alternatively Aftertreatment values)
Indication: LOC (Local), Alarm (in AL or ECU list), R Remote data
connection active, L Access Lock
2 Analog 1 to Analog 4 , 4x single barograph
3 Analog 5 to Analog 8 , 4x single barograph (if they are configured)
4
Battery ID-DCU Industrial, bargraph, Engine Cylinders statistic
temperatures, Engine states timer
5 ID-DCU Industrial BI 1 to 7
6 ID-DCU Industrial BI 8 to 14
7 ID-DCU Industrial BO 1 to 7
8 ID-DCU Industrial BO 8 to 14
9 Statistics: Run hours, Number of starts, Service time
10 GPS speed (value is shared from other devices)
Following screens appears depend on configuration
Opt
Analog 1 to Analog 8, Name- value dimension, active alarm is
negative (1x IS-AIN8(TC) or Inteli AIN8(TC))
Opt IS-BIN BI indication 1 to 8
Opt IS-BIN BI indication 9 to 16
Opt IS-BIN BO indication 1 to 8
Opt ECU values I.
Opt ECU values II.
Setpoints screens correspond with Setpoint table above.
Alarm indication
Possible Alarm list and History record prefixes
To Next Page
Loading...
