InteliDrive DCU Industrial 3.4.0 Global Guide
213
Related FW 3.4.0 Related applications AS, SS
Comm object 1830
Description
Indicates that engine is too cold to start and operator should wait until the signal becomes inactive.
WaitToStartLmp
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 141
Description
Those eight LBOs can be handled from InteliMonitor Remote switch window. This way can operator directly
handle controller binary outputs or other e.g. PLC functions.
RemoteControl1
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 142
Description
Those eight LBOs can be handled from InteliMonitor Remote switch window. This way can operator directly
handle controller binary outputs or other e.g. PLC functions.
RemoteControl2
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 143
Description
Those eight LBOs can be handled from InteliMonitor Remote switch window. This way can operator directly
handle controller binary outputs or other e.g. PLC functions.
RemoteControl3
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 144
Description
Those eight LBOs can be handled from InteliMonitor Remote switch window. This way can operator directly
handle controller binary outputs or other e.g. PLC functions.
RemoteControl4
6 back to List of LBO
To Next Page
Loading...
