InteliDrive DCU Industrial 3.4.0 Global Guide
261
Value group Engine values Related FW 3.4.0
Resolution [units] 0,1 [V]
Comm object 12153 Related applications AS, SS
Description
A value belonging to a particular Volvo Penta device - Power Module. Communication over the J1587
interface.
Data message PID 168 Battery Potential (Voltage)
Measured electrical potential of the primary battery.
Pri Battery
6 back to List of values
Value group Engine values Related FW 3.4.0
Resolution [units] 0,1 [V]
Comm object 12154 Related applications AS, SS
Description
A value belonging to a particular Volvo Penta device - Power Module. Communication over the J1587
interface.
Data message PID 444 Battery #2 Potential (Voltage)
Measured electrical of the isolated battery #2.
Sec Battery
6 back to List of values
Loadsharing
Value group Loadsharing Related FW 3.4.0
Resolution [units] 1 [%]
Comm object 10136 Related applications AS
Description
Average value calculated from all Speed Request values of controllers running in Loadsharing mode together
(on the same CAN2 bus). See Load sharing block diagram.
RQSP Aver
6 back to List of values
Value group Loadsharing Related FW 3.4.0
Resolution [units] 1 [%]
Comm object 10181 Related applications AS
Description
Ramped Loadsharing: RQSP Aver Value (in Loadsharing mode) or ramped Engine Values: Speed Request
value (in Running mode). The Ramp speed is specified by setpoint Loadsharing: RQSP Ramp. See
Loadsharing block diagram.
RQSP Ramp
6 back to List of values
To Next Page
Loading...
