InteliDrive DCU Industrial 3.4.0 Global Guide
304
Binary output (Open collector output)
Max current 500 mA
Max switching voltage 36V DC
Analog output (not electric separated)
Current
Range 0 - 20 mA
Accuracy ± 100 µA + ±0.5 % of actual value (Rmax 500 Ω)
Voltage
Range 0 – 10 V
Accuracy ± 20 mV + ±0.5 % of actual value (Imax 5mA)
PWM
Level 5V, adjustable freq 200÷2400Hz (Imax 20 mA) (minimal step of pulse is
2µs)
Max current of AGND 100 mA
Galvanic separation
CAN bus is galvanic separated from the measurement and power supply. All
Inputs/outputs are not galvanic separated from power supply
Power supply 8 to 36 V DC
Protection IP20
Current consumption 35 mA at 24V ÷ 100 mA at 8 V
Storage temperature - 40 °C to + 80 °C
Operating temperature - 30 °C to + 70 °C
Heat radiation 4 W
The product is fully supported in fw IGS-NT 3.0 or higher and in IGS-NT-branches based on this fw.
6 back to Extensional modules
To Next Page
Loading...
Need help?
General
