InteliDrive DCU Industrial 3.4.0 Global Guide
347
Wiring
6 back to Extensional modules
Technical data
Dimension (W × H × D) 105 × 40 × 25 mm (4.13’ × 1.57’ × 0.98’)
Interface to controller Sudect mounted (ID-COM family port)
Binary inputs and outputs -
Analog input and outputs -
Nominal power supply
Directly from ID-DCU consumption
Power supply range
Current consumption 0.1A
Operating temperature - 30 °C to + 70 °C
6 back to Extensional modules
8.2.13 Theory of binary inputs and outputs
6 back to Extensional modules
Binary inputs
Pull Up
Principle of internal connection is showed on picture below.
The bulb presents internal state of binary input.
In case of connection terminal “BIN” with terminal “COM” (GND) then the internal state is logical 1.
In case of connection +Ucc polarity to the “BIN” terminal is internal state logical 0.
To Next Page
Loading...
