InteliDrive DCU Industrial 3.4.0 Global Guide
47
Be aware of interference signal from Speed governor when one speed pick-up is used.
Power supply fusing
External fuse rated max. 2.5A shall be used to limit current from the power supply to the controller and modules.
Controller and I/O modules should never be connected directly to the starting battery.
Fuse value and type depends on number of connected devices and wire length.
Recommended fuse (not fast) type - due to internal capacitors charging during power up.
Power supply
Use min. power supply cable of 1.5 mm2 to ensure proper function.
Maximum continuous DC power supply voltage is 36VDC.
Maximum allowable power supply voltage is 39VDC – see chapter Technical data.
To Next Page
Loading...
