WAIT for position (60,60)
MOVE
data
WAIT for position (60,60)
MOVE
data
>
At
the time of the second WAIT
in
this sequence, the beam counters will be greater than
the position shown in the instructions. Therefore, the second MOVE will also be per-
formed.
Note also
that
the above sequence of instructions could
just
as easily be
WAIT for position (60,60)
MOVE
data
MOVE
data
MOVE
data
because multiple moves can follow a single WAIT.
COMPLETE
SAMPLE
COPPER
LIST
The
following example shows a complete Copper list. This list
is
for two
bit-planes-
one
at
$21000 and one
at
$25000.
At
the top of the screen, the color registers are loaded
with the following values:
Register
Color
COLOROO
white
COLOR01 red
COLOR02 green
COLOR03 blue
At
line 150 on the screen, the color registers are reloaded:
Coprocessor Hardware
17
To Next Page
Loading...
