Cosmo LS-R700 User Manual

5 Screen List 53
5
Title
Channel Title
Up to 20 letters are allowed.
Unit
Leak Unit
Pa, kPa, mL/s, mL/min, L/min, Pa·m
3
/s, E-3 Pa·m
3
/s, Pa/s, Pa/min,
*Pa/s, *Pa/min (mmH
2
O, inH
2
O, mmHg, in
3
/min, in
3
/d, ft
3
/h) *1
Pressure Unit
kPa, MPa (PSI, kg/cm
2
,, bar, mbar, mmHg, cmHg, inHg) *1
K(Ve) Unit
mL, L (in3, ft3) *1
Timer
Charge Delay (DL1)
0 to 999.9 [s]
PCHK Fixed to
0.2 [s] for the pneumatic circuits those have the stage and 0.0 (s)
for those don’t have the stage.
Pressurization (CHG)
0 to 999.9 [s]
Equalization (BAL1)
Balance Delay (DL2)
Stabilization (BAL2)
Detection (DET)
Air-Blow (BLW)
Exhaust (EXH)
End (END)
0.2 to 999.9 [s]
Test Press
Pressure Setting
Pressure applied to tested part (WORK) and reference part (MASTER)
Upper Press Limit
Monitors the test pressure.
Criteria for detecting Large leak.
Lower Press Limit
Pressure Monitoring Enable/Disable Pressure Monitoring with upper/Lower test pressure
limits.
PS Auto-Zero
Disable/Enable
*1 The units in ( ) are not available for SI unit restriction models.
Refer to
7
7 3.5.
Refer to
7
7 2.2.
Refer to
7
7 4.1.
Leak Limit
CHG Options
Self Check
BAL2 UL
BAL2 LL
DET UL2
DET UL
DET LL
DET LL2
Pre-exhaust Timer (PEXH)
Precharge Settings
Precharge Upper Limit
Precharge Lower Limit
Bypass Valve
Precharge Iterations
Overall Self Check
Blow ΔP Limit
Idle ΔP Check Limit
NR Iterations
Precharge Timer (PCHG)
Idle ΔP Check Timer

Cosmo LS-R700 Specifications

General

Brand	Cosmo
Model	LS-R700
Category	Test Equipment
Language	English