Cosmo LS-R700 - Battery Replacement; Error Log; I;O Monitor; Inspection

5 Screen List 63
5
8.1 Battery Replacement
Menu for replacing battery. Follow the number for the battery replacement.
8.2 Error Log
Displays Error Log.
8.3 I/O Monitor
I/O signals can be monitored on this screen.
8.4 Inspection
Calib Unit
Leak
Pa, kPa (mmH
2
O, inH
2
O, inH
2
O, mmHg) *1
Test Pressure
kPa, MPa (PSI, kg/cm
2
, bar, mbar, mmHg, cmHg, inHg) *1
Leak Check
No Leak Check
Perform a No-Leak Check of LS-R700 itself.
Sensor
DPS
Adjust DPS offset and check the span
PS
Adjust PS offset and check the span
E/P Regulator
Adjust E/P regulator
*1 The units in ( ) are not available for SI unit restriction models.
Battery Replacement
1 Memory Backup
2 Memory Restore
3 Replacement Date
4 Set Date & Time
Initialize Memory
Inspection
E/P Regulator
Sensor
Calib Unit
Leak Check
Leak
Test Pressure
No-Leak Check
DPS
PS
Refer to
“
3
3
I
NTERFACE
”
for the details.
Refer to
“
8
8
M
AINTENANCE
”
for the details.