Cosmo LS-R700 - K(Ve) Automatic Setup; K(Ve) Check

5 Screen List 59
5
5.2 K(Ve) Automatic Setup
Menu to perform K(Ve) Automatic Setup
5.3 K(Ve) Check
Menu to perform K(Ve) check manually.
Program K(Ve) Check Limit in percentage (%) before performing K(Ve) Check.
LS-R700 compares K(Ve) measured with a known good part to the K(Ve) stored in memory.
An error is displayed if the difference exceeds the tolerance. This can be used for daily sensitivity checks.
Refer to “
7
7
O
PERATIONS
L
ISTED BY
P
URPOSE
” for the details.
Refer to “
8
8 M
AINTENANCE
” for the details.