Cosmo LS-R700 User Manual

52 5 Screen List
5
Timer
Pressurization (CHG)
0 to 999.9 [s]
Equalization (BAL1)
Stabilization (BAL2)
Detection (DET)
Test
Pressure
Pressure Unit
kPa, MPa (PSI, kg/cm
2
, bar, mbar, mmHg, cmHg, inHg) *1
Pressure Setting
Pressure applied to tested part (WORK) and reference part (MASTER)
Upper Press Limit
Varies depending on the test pressure range and unit.
Lower Press Limit
Leak Limit
Leak Unit
Pa, kPa, mL/s, mL/min, L/min, Pa·m
3
/s, E-3 Pa·m
3
/s, Pa/s, Pa/min,
*Pa/s, *Pa/min (mmH
2
O, inH
2
O, mmHg, in
3
/min, in
3
/d, ft
3
/h) *1
DET UL
Small leak limit for WORK side during DET stage
DET LL
Small leak limit for MASTER side during DET stage
K(Ve)
K(Ve) Unit Unit for K(Ve) value
K(Ve) Value
Enter K(Ve) value if known.
*1 The units in ( ) are not available for SI unit restriction models.
3.2 Advanced Setting
All the leak test settings including the basic settings
Refer to
7
7 9.1.
Advanced Settings
Timer
Test Press
Title
Unit
Channel Title
Leak Unit
Pressure Unit
K(Ve) Unit
Charge Delay (DL1)
PCHK
Pressurization (CHG)
Equalization (BAL1)
Balance Delay (DL2)
Stabilization (BAL2)
Detection (DET)
Air-Blow (BLW)
Exhaust (EXH)
End (END)
Pressure Setting
Upper Press Limit
Lower Press Limit
Pressure Monitoring
PS Auto-Zero

Cosmo LS-R700 Specifications

General

Brand	Cosmo
Model	LS-R700
Category	Test Equipment
Language	English