To Next PageTo Next Page
Need help?Do you have a question about the Cosmo LS-R700 and is the answer not in the manual?
General| Brand | Cosmo |
|---|---|
| Model | LS-R700 |
| Category | Test Equipment |
| Language | English |
Provides introductory information, safety precautions, and notes for the installation process.
Details unpacking, part identification, installation steps, and initial power-on.
Describes control I/O ports, RS-232C serial interface, and USB port functionalities.
Explains fundamental operations like power on, navigation, settings lock/unlock, and mode switching.
Provides an overview of all menus and descriptions for measurement screens.
Covers initial setups, performing air leak tests, and initial adjustment flows.
Details operations based on purpose, such as reducing cycle time and enhancing reliability.
Covers daily, monthly, and annual inspection points, plus maintenance features.
Details the procedure for replacing the internal battery and troubleshooting related errors.
Explains how to initialize the device memory after battery replacement or system issues.
Guides users through identifying and resolving errors, large leaks, and frequent fails.
Lists key specifications including sensor resolution, range, pressure, units, timers, and power.
Details pneumatic circuits, pressure ranges, regulators, and available options for different models.
Explains the leak testing process, stage summary, and internal pressure changes.
Provides diagrams and dimensions of the device's external appearance.
Illustrates the pneumatic circuits for different configurations (A1, A2, V).
Provides conversion tables for pressure/flow units and defines leak units.
Details CE marking conformity and information for users regarding FCC rules.
Describes external exhaust valves and bypass circuit units used with the tester.
