Covidien INVOS 5100C - Electrical; Environmental Requirements

Specifications
A-2 Operator's Manual
A.2.3
Electrical
A.2.4 Environmental Requirements
Diagnostics Automatic self-test
Continuous operation
Safety class
Type BF Class I
Power External AC mains or backup battery
Signal strength indicator 0–5 bars (5 being the highest signal strength)
See sections 6.5.14 Signal Strength Indicator (SSI) and 9.8.5 Troubleshooting Signal Strength Indi-
cator (SSI)
TableA-2.Operational Specifications (Continued)
TableA-3.Electrical Specifications
Input voltage 100–240 VAC
Frequency 50/60 Hz
Current 1.0 A – 0.5 A (maximum at 100 and 240 volts respectively
Fuse
F2.5 A 250V
Backup battery
12 VDC; approximately 20 minutes
Digital output
RS-232 communications
USP port
USB 2.0 flash memory (does not support other USB devices)
TableA-4.Environmental Requirements
Operating temperature +16°C to +32°C (+60°F to +90°F)
Shipping/storage temperature 0°C to +50°C (+32°F to +122°F)
Operating humidity 20% to 80%, non-condensing
Shipping/storage humidity 15% to 95%, non-condensing
Operating altitude and pressure –380 m to +3000 m (–1247 ft to +9842 ft)
Ambient pressure 106 kPa to 70 kPa
Shipping/storage altitude and pressure –500 m to +4600 m (–1640 ft to +15092 ft)
Ambient pressure 109 kPa to 52 kPa