Operation
6-16 Operator's Manual
When finished, press the HOME key to exit the User configuration menu and return to the
Main screen. On the Main screen, the new alarm limit is displayed (numerical and graphical).
6.5.4 Alarm Volume
To change the alarm volume, press the HOME key to display the Main screen, then perform
the following navigation bar options:
In the User configuration menu, select NEXT to scroll to ALARM VOLUME. Use INCREASE and
DECREASE options to adjust the volume.
When finished, press the HOME key to exit the User configuration menu and return to the
Main screen.
Alarm Audio Off Reminder
When this feature is enabled, the monitor emits a beep (longer than the low priority alarm tone)
every 3 minutes while alarms are muted. When the monitor turns on, the feature is disabled.
By default, the Alarm audio off reminder is set to OFF.
To turn the Alarm audio off reminder on:
1. Navigate to page 3 of the User configuration screen.
2. Continue pressing NEXT until ALARM OFF REMINDER OFF is highlighted.
BASELINE MENU EVENT MARK ALARM AUDIO ON/OFF NEXT MENU
OUTPUT SELECT USER CONFIGURATION TIME SCALE NEXT MENU
NEXT PREVIOUS OFF ON
NEXT PREVIOUS INCREASE DECREASE
To Next Page
Loading...
