Covidien INVOS 5100C - Patient Identifier

Operation
6-4 Operator's Manual
Minutes
Use the INCREASE or DECREASE options to adjust and change the minutes as necessary. Press
PREVIOUS MENU again to return to the Start screen.
Seconds
Use the INCREASE or DECREASE options to adjust and change the seconds as necessary. Press
PREVIOUS MENU again to return to the Start screen.
6.4.3 Patient Identifier
 Note:
The patient identifier can be stored or edited by inputing after the Start screen or at anytime during the
run function.
A patient identifier allows the operator to locate stored data files with a unique alphanumeric
identification when using the Case archive function or AUC and Database operational mode.
Entering Patient Identifier after Start Screen
After the INVOS™ system is turned ON , perform the following menu options to enter the
unique patient identifier:
NEW PATIENT PREVIOUS PATIENT DATE/TIME NEXT MENU
DATE TIME PREVIOUS MENU
HOURS MINUTES SECONDS PREVIOUS MENU
MINUTES = XX INCREASE DECREASE PREVIOUS MENU
NEW PATIENT PREVIOUS PATIENT DATE/TIME NEXT MENU
DATE TIME PREVIOUS MENU
HOURS MINUTES SECONDS PREVIOUS MENU
SECONDS = XX INCREASE DECREASE PREVIOUS MENU
NEW PATIENT PREVIOUS PATIENT DATE/TIME NEXT MENU
<– –> NEXT ROW SELECT
<– –> NEXT ROW SELECT